Customization: | Available |
---|---|
After-sales Service: | 12 months |
Warranty: | 12 months |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
We own a series of products under the registered trademark of "WANXIN",which covers two main areas: Powder coating machine and Flock Machines.
Powder oven(Diesel)
The powder curing oven is a part of powder coating line.
Objective: The workpiece surface of powder coating heating to the specified temperature and heat preservation corresponding time, melting, flow flat, curing.
Process steps: Spraying good workpiece push curing oven, heating to the predetermined temperature (usually 185 degrees) and heat preservation corresponding time (20 minutes). The High temperature heat resistance Circulating fan can Can guarantee the oven internal places (including corner) have the same temperature. Blow on take out cooling namely get finished.
Powder Curing oven specification
1. Custom Dimension:customized according to requirement ;
Depends on workpiece size and pre-designed workpiece curing output;
2. Powder curing chamber Body: Galvanizing plates. stainless steel & structual steel;
3. Powder curing oven doors: Safe and good exposition resistance performace.
4. Hot air circulation mode: Bottom blowing-in and Top hot-air returning mode;
5. Exhaust air generated by diesel burning is not go into the hot air circulation;
6.Exhasut outlet special valve device automatically control the exhaust density after curing processing;
7.No extra outerside Duct is used ,Full inner circulation system reducing the heating loss and save the diesel cost and consumption.
8.Heat Insulation materials: 90~220mm is adjustable according to working temperature range requirement
9. Supply power: 220V/380V 50/60HZ
Curing Tunnel: