Powder Spray/Painting/Coating Control Unit Machine K1 for Flat and Large Workpiece

• Customization: Available
• Warranty: 12 Months
• Type: Electrostatic Spraying Equipment
• Model NO.: K1
• Application: Plastic Spraying Equipment
• Coating: Powder
• Certification: CE
• Method Type: Manual
• Condition: New
• After-sales Service: 12 Months
• Transport Package: Wooden Case, Carton, Foam, Seal
• Specification: CE
• Trademark: WX
• Origin: Hangzhou, China
• HS Code: 84243000
• Production Capacity: 2000units/Year

Product Description

Metal Manual Electrostatic Powder Coating/Spray/Paint control unit machine (K1) for flat and large workpiece




 

POWDER COATING MACHINE (K1) ELECTRICAL DATA
Nominal input voltage	220V (100V-240VAC)
Frequency	50/60 Hz
Input power	40 VA
Rated output voltage(to gun)	12~18VPP
Rated output frequency(to gun)	About20KHZ
Protection type	IP54
Temperature rang	+10ºC to +40ºC (+50ºF to +104ºF)
Solenoid Valve Voltage	24VDC
Gun output voltage	0-100KVDC
Gun output current	0-100μA

POWDER COATING MACHINE (K1)  PNEUMATICAL DATA
MAX.input pressure	8bar
MIN.input pressure	5bar
Output pressure	0~8bar
Max.water vapor content ofthe compressed air	1.3g/m³
Max.oil vapor content of the compressed air	0.1mg/m³
Max.compressed air consumption	19Nm³/h

POWDER COATING MACHINE (K1) GUN PARAMETER
Input	12~18VPP
Voltage Frequency	Around 22KHZ
Input Current	<0.5A
Output Voltage	15~100KV Negative
Max.Output powder volume	Around 600G/MIN
Gun cable	4 M
Gun weight	425g