WX-201 Electrostatic powder coating system(KCI copy)
With double controlers-Also can be used double control panels on WX-101/WX-2008/WX-301 as your requirement.

2*controller+2 electrostatic powder coating gun+1*powder hopper with 2*injector block*1*trolly->

Built-in high voltage electrostatic generator
1. Powder applicable:
All kinds of powder including metal powder, micro powder
2. Configuration:
Powder gun *1 + host*1 + powder pump*1 + powder container*1 +trolley*1 + oil-water separator*1 + air pressure regulating valve*1

3. Technical parameter
A). Host:
Input power voltage: 90-260V 50-60Hz (switch mode power)
Input power: 50w
Different countries, different standard

B). Powder supply&air soure
Electromagnetic valve control power voltage: 24V DC
Input air pressure: 0-0.6Mpa
Output air pressure: 0-0.5Mpa
Max. Air consumption: 13.2m/h(0.4Mpa)
Powder container volume: 55L

C). Powder gun
Input air pressure: <=0.3Mpa
Output powder volume: Max. 550g/min
Output power voltage: 0- -100kv
Output current: 0-200uA
Gun weight: 460g